Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Update problem resolved 200

posted by  yama on  Thu Nov 9 05:52 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

Thanks for all the responses.

It turns out the brake lines and corresponding fittings are 10mm 1.00 not 9mm like I intially thought. Ending just buying a grade 8.8 10mm 1.00 bolt and cutting four slots into it with a dremel wheel similar to what a thread restorer would have. The cutting didn't damage the threads at all. It worked perfectly. Also bought the nut to clean up the brass compression fitting on the line. total cost was under $2.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need Help Thread Chasing Front Calipers [200]
posted by  yama  on Tue Nov 7 14:12 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.