Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Drive Belts Mis-aligned and proposed solution...need feedback. 200 1993

posted by  Aye Roll on  Thu Nov 23 01:35 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 21:08 CST 2014
[RELATED]

If the rear bracket of the AC is not tightened, the compressor will pull out of line. I have never had a problem with the brackets bending.

I believe you will be able to get everything straight again if you check every bolt holding brackets to the AC and PS pump- I've had a number of problems with the PS pump in both the remote-reservoir style and the 91+ one piece type coming loose from the pump, allowing pump movement and belt misalignment.

Make sure the bolts through the accessory bushings are tight enough to compress the bushings and make them tight- requires a second wrench on the back side usually.


Good luck with it!
--
::: Rob Bareiss, New London CT ::: 92 244 M47 211K ::: 90 745GL M47 273K ::: 88 245DL AW70 190K ::: 84 242DL Project ::: 70 VW Bus ::: 70 VW Pickup Project ::: 71 VW Notchback :::






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine Drive Belts Mis-aligned and proposed solution...need feedback. [200][1993]
posted by  raidman  on Wed Nov 22 16:21 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.