Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rail to Rail - '71-145 140-160

posted by  Redwood Chair on  Sat Dec 23 16:24 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Feb 25 21:29 CST 2014
[RELATED]

James,
Report from Balmy San Francisco,1/4 mile from the ocean @ 50.5 Degrees...
1971 145-S
A little difficult to do exactly at the steering box with the engine in.
Two inches foreward,I can place two sticks in a straight line,and I
get 21 & 13/16 inches. However there are gussets wrapped around
the front frame rails where the box and idler bolt up,so I would call it
21 & 3/4 inches Inside Dimension.
Pulling outside to outside on the rails gets 26".
Center to center of foreward front cross-member mounting bolts looks like 24 inches.

Off topic; the V8 guys seem to blow the 240 rear ends above 300 hp.
From what I have heard.
Howsa'bout a 300 hp,16V white block/900 trans?
Did you see the B30 Mega-squirt thread?
Ken
--
White 86-245 DL, M 46, IPD bars & Wagon Overloads,Commando Bumpers,SS Belly Pan & Air Pickup,Straight-Shot EMT Chassis & Tower Braces,Scorpius Alloys,2 Belt No AC Conversion,Black POR-15 No Glare Front End






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Spindle kingpin inclination of the 140-160 [140-160]
posted by  Volvo Heretic  on Fri Dec 22 06:28 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.