Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

offset 200 1992

posted by  fpeck1948 on  Fri Jan 19 03:22 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 27 08:46 CST 2013
[RELATED]

My 92 244 rims which I have now I believe to be:

5 X 108, 14x5.5 with a 20MM offset with a center bore of 65MM

Below are the details for a set of rims I am looking to buy and put on my 92 244:

Bolt pattern is 5 x 4.5 or 114.3mm
Size is 14 inches tall x 6 inches wide
Offset is +35
Center bore is 59.6mm

I know I will need adapters to go from 5X108 to 5X114.3 with a 15+ spacing to go from 20mm to 35mm.

Since the new rims are 59.6 CB will they have to be machined to 65 CB.

Thanks
Frank





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Center Bore [200][1992]
posted by  fpeck1948 subscriber  on Thu Jan 18 04:40 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.