I dont have a picture but that sensor that your seeing is the right one, its back by the firewall under the intake manifold. Im gonna change the intake gaskets this spring and while im at it im gonna change the thermal time sensor and all the vaccuum lines, and clean the crap out of everything while im at it. I don't know if you can get it without taking the manifold of but if you are able to get the plug off you may be able to get a long enough extension and a deep socket in there to get it out. Just be carefull with the plug so you dont break it and make sure to drain the coolant. I used a spark plug socket to get the coolant temp sensor off and I think it is the same size as the TTS just pull the little rubber piece out of the socket and it should work.