Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2009 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

codes 900 1996

Hello, Before you start repacing parts. Start with some good carb spray. Make sure the cooling fan is not on and the car warmed up. Next add the extension straw to the car cleaner and spray carb cleaner around your number two intake manifold gasket. Focus the spray as close to the gasket as possible. If your sudden miss goes away I would suspect the intake manifold gasket. If it doesn't, then go and check the spark plug, swap #5 to #2 spot. If no difference, then swap the coil 5 with 2. If the miss jumps to #5 then its the coil. If it stays the same then, as the car is running, lift up on the number two coil, do you here a sharp tap, tap, tap sound? Then the coil is working. It could be the power stage, swap them from front to back. If all this fails to take care of the miss, then go to the fuel injection, but not untill. It will save headaches






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New codes [900][1996]
posted by  someone claiming to be keith  on Mon Mar 5 04:58 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.