Hello, The cross member is different for the transmission only because it is aluminum, but it has the threaded holes for the O2 sensor wiring, so use a 960 cross member, you also need to use the engine mount pod from 960. This is quite an easy swap. I have done two in the past from totaled 960's. I have even gone as far as welding on the 960 suspension mounts for the much quieter ride. I have yet to tackle the independent rear suspension swap, but I will be doing one this month. If you are using parts from a 94 down the gas tank is bigger for longer cruising, but will only work from a 960 wagon. The dash swap gets a bit tricky with old plastic, so use extra time and care. Pauli