Eric thanks for the information. That must be it as my lower bushing were both pressed in from the outside with the larger head on the outside. The Haynes manual did mention about bushings for radial tires. I assume those bushing do not fit the older A-arm. Does the newer A-arm fit the early 140? My 140 has radial tires on it from the previous owner. Took some work to get the top bushing out. Book showed using something called a inset or that recommended making something out of a washer to help press the first bushing out. Once I got the first bushing out I was able to use a ball joint press on the other bushing.


Craig