Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How tough to replace Steering column 200 1988

posted by  jon_h on  Thu Mar 6 01:08 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:57 CST 2014
[RELATED]

1. Vibration when braking is often the rotors. Look at tie rod ends also.

2. Steering rack replacement is an easy job once you've done it: 2 tie-rod end nuts, 4 rack nuts, 2 PS hoses and one bolt on the steering u-joint (and some prying). The column per se doesn't have to come out. Rebuilt units are ~ $250 I think.

3. Lug nut bolts are cheap: tap them out, pull new ones through. Are yours cross-threaded or just worn.
--
a few 1985-92 240s & 245s - parts cars & drivers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How tough to replace Steering column [200][1988]
posted by  chickenricekid  on Wed Mar 5 18:49 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.