Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Clutch slave - me slave 120-130 1968

posted by  planetman on  Thu May 29 03:08 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

New clutch slave cylinders are still available from at least 2 different manufacturers, plus there are still NOS units out there. I have all 3 types in stock.

If you plan on rebuilding your old clutch slave, you need to know what size the bore is as Volvo sold them with 3/4" or 13/16" bores and you need a different rebuild kit to repair each size.

SP2001 is the old Girling number for the 3/4" bore rebuild kits, which are easily available.

SP2626 is the correct old Girling number for the 13/16" bore, but I have to buy the rebuild kits for these right from Volvo as I can no longer can get the correct size through the aftermarket.

BTW, also get a new copper sealing washer for the clutch flex hose to clutch slave cylinder sealing flange as neither repair kit comes with this usually necessary seal.

Good luck!
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90501






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Clutch slave - me slave [120-130][1968]
posted by  Ohiwish  on Wed May 28 13:56 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.