|
Hi Led, and thanks for the idea! I have additional phenolic spacers and adding one to each carb would move them "up and out" a bit from the exhaust manifold and if anything changes (and even if it does not) it would help me diagnose what is really going on.
I thought this might be a common problem with these engine/carb combos but Sil's response seems to indicate otherwise. Sil, did your 122s have SUs?
Attached is a photo of the area in question - its a little hard to see, but there is only about an inch between the ex. manifold and the float bowl of the rear carb.
Cheers!
OK
PS The PO had switched the passenger and drivers seats, the adjustment should be inboard, I have not switched them back yet.
.
_
_

|