Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Keep overdrive working--try the cheapest (and easiest) thing first... 200 1989

uid 18083's pic
posted by  lucid on  Fri Jul 4 01:04 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

======(Canned Post)==========>

If it was mine, I would "diagnostically" do a temporary bypass of the OD relay — by replacing it with a jumper wire at the relay harness connector plug to connect two terminals together:
• Input terminal #15 (2 wires, a Blue and a Gray)
• Output terminal #87 (White wire)

A good-fitting jumper can be made with flat male crimp-on terminals that are the same size and shape as the relay terminals. This jumper wire will simulate a relay that is always energized — which is the normal condition, until the shifter button is pressed.

If the fuse blows, the most likely suspect is the output White wire to the solenoid. Or less likely, the Gray wire from the shifter switch to the relay.

If the OD now works OK and you don't need the shifter button downshift option, just leave the jumper in place.

<====(end Post)================






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ok to drive WITHOUT overdrive engaged? Will this hurt the transmission? [200][1989]
posted by  talandriel  on Thu Jul 3 20:05 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.