Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

testing your sensor 200 1991

posted by  trichard on  Sun Jul 27 11:11 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:52 CST 2014
[RELATED]

disconnect the neg bat cable
unplug the sensor harness at the firewall and using a multimeter set for lowest ohms ...the one that sounds a tone ....probe the 2 sensor contacts. you should get a small ohm reading of something like .2 or some such small number.

if you have no ohm reading then very likely the 2 contacts affixed to the sensor windings are damaged and you will need to replace it.

the sensor is incredibly simple in construction with no moving parts.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New very stubborn ABS speed sensor [200][1991]
posted by  chatter  on Sun Jul 27 06:34 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.