Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2015 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Converting Cable clutch to Hydraulic 120-130

posted by  planetman on  Thu Sep 25 15:02 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

To convert to the 1969-1970 pedal assembly, you will need the entire pedal box from a donor car along with all the hardware. You will have to drill all the spot welds to cleanly remove the old box before welding on the replacement.

The 140 clutch pedal is not the same and is not interchangeable.

I do not believe there is a problem with a hydraulic clutch release systems as a whole. Hydraulic clutch release bearings are quite common and are used in Ford smaller trucks.

Usually problems are caused by the lack of maintainance, which is really just flushing and this is quite easy. I suggest to my customers to flush their clutch hydraulics once every 2 years.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90501






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Converting Cable clutch to Hydraulic [120-130]
posted by  someone claiming to be Red 122s  on Thu Sep 25 08:00 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.