Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2011 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shaking all over 120-130

posted by  gert 444 on  Mon Dec 29 09:53 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 04:11 CST 2014
[RELATED]

It is indeed not necessary to remove engine including gearbox.
The Haynes 120/130-manual says that in order to get at the torque converter bolts the gearbox will have to be separated from the bellhousing, after which the bellhousing must be removed from the engine. Then there is access to the four bolts that fasten the t.c. to the flywheel via the adapter plate.

But if these bolts have come loose, I think I should notice that more often than in only those specific situations as mentioned.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Shaking all over [120-130]
posted by  gert 444  on Sat Dec 27 06:18 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.