|
Bryan,
It was not my post. It was Lucid's. His problem was the ground for the radio suppression relay. Follow the wires from the connector on the bottom of the relay (right side fender well) down to where it connects (with a couple of others) to a ground point. Remove the bolt and wire brush the area, the connectors, and the bolt. Put it all back together and then spray some paint over the bare metal.
That may not fix your problem. But maintenance of grounds is always a good thing. ;-)
--
Mr. Shannon DeWolfe -- I've taken to using mister because my name misleads folks on the WWW. I am a 53 year old fat man. ;-)
|