Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

140 Alternator / engine fan offset 120-130 1966

posted by  walrus3 on  Fri Jun 12 06:47 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

The spacer is about half an inch thick and it is the same whether you use a B20 or a late B18 block.
The above is assuming you are speaking of the OEM alternator and the ½"-13 UNC bolt that is the principal mount for it.
The best bet is to adjust the belt tension then use a 3/4" socket with a breakover handle and tighten it right.
This will also help preserve the belt tension.
--
George Downs, Bartlesville, Heart of the USA!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 140 Alternator / engine fan offset [120-130][1966]
posted by  Dylan Berichon  on Fri Jun 12 03:31 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.