Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

I am replacing doors- I have a question about the wire harness

posted by  will rehsper on  Thu Oct 22 01:41 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 3 14:55 CST 2012
[RELATED]

At this point your best bet is to use all of the wiring from the door you are replacing. The folks at the factory got it all in there, you should be able to get it out and do the same. It should be plug and play, at least on the car side. Start with the "new" door and its cut wires. Best to learn on the one you're not going to use.

-Will
--
854 - 244 - Mini






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I am replacing doors- I have a question about the wire harness
posted by  kozak  on Wed Oct 21 11:25 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.