Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2006 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

preparing my 72E for a respray 1800

uid 39111's pic
posted by  Kenner on  Thu Nov 12 02:18 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 24 15:42 CST 2014
[RELATED]

looking for some advice.
I have a 72E that has a solid body. I bought it as a shell that was sitting on stands in a heated garage since 1983. Still has the 1973 license plates. The Po stripped it down and rebuilt the body. Volvo labels are on the new cross-members and some body panels. He really did a good job welding wherever was needed.
I have to finish the body, paint and reconstruct.
There is tons of filler/glazing on the body. I assume this a factory filler as the paint is original. Some type of prefill or leveler over good steel.

Should I grind right down to the metal before giving it to a pro to paint. The filler seems really thick in places. Not sure if the paint guy would benefit from seeing where all the filler was applied or if it matters.

This is going to be a super looking car when done.
--
73 ES, 91 240, 98 S90






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New preparing my 72E for a respray [1800]
posted by  Kenner  on Thu Nov 12 02:18 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.