Alright guys both seats are now working on the S60 seats into a 122s project.
Thank you to both Pixeleater and KlausC for their help.

On the drivers seat I hooked the Green and Black wires to Power and Ground, respectively.
On the passengers seat I hooked the Red,Orange and Black wires to Power,Power and ground, respectively.

I will not be moving the parking brake to the transmission tunnel. After cutting away the airbag sensor mount and relocating it to the inside of the seat back, I have plenty of room to properly operate the parking brake. I had also removed the drivers seat controls from the side and stowed it below the seat itself. Afterall, how often does a person really adjust their seat?

Overall fitment is good with an inch or two on each side of the seats from transmission tunnel and doors. With both seats mobile, there should still be plenty of room behind the seats for passengers to sit. This may require some adjusting of the front seats and temporary inconvenience to the driver but will still allow for 4 occupants as before.

A fuse block from the local parts store was mounted just below the dash on the drivers side inside the "glove box" (Both pepboys and carquest had the fuse blocks in their general repair/miscellaneous parts area)

If anyone wants more pictures feel free to let me know and I will do my best to get them on here.