Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cheap easy solution 200 1993

uid 12839's pic
posted by  Paul Driver of Inga on  Thu Apr 15 06:08 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 25 16:42 CST 2012
[RELATED]

The battery tray on my 86 (metal one) was in sad condition and the hold down rusted off. Having that positive terminal that close to the fender and loose just seemed like a bad idea so went looking for a fix. Everything at the PUP was in worse shape than Inga's tray.

Went with a new universal battery tray and hold down. Used one from Auto Zone but any chain store will carry some version of it.

This one had several slots precut in the tray. Ended up having to drill one hole, the existing slots lined up with the other three bolt holes. The hold down hooks into the both sides of the battery tray. Two wing nuts hold a clamp across the battery.

Cost less than $20 for everything and it took 30 minutes to install it.

Not stock Volvo, but sure was an easy cheap solution vs having the battery loose under the hood.

Regards,

Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New battery holding clamp [200][1993]
posted by  geof  on Wed Apr 14 15:29 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.