Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20A block with B20F head 140-160

posted by  JohnMc on  Thu Apr 29 02:01 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 07:42 CST 2014
[RELATED]

K-Jet is a lot better in that regards - it measures the air going in, not what a 'stock' motor should be doing at that manifold pressure, so it's a lot less caring about changes in the motors VE curve.

If you're used to the K cam, going to the C cam in the B20 won't be much fun, so I'd agree that a nicer cam would be good to do. Unless it has an automatic transmission, in which case you're probably better off with the 'C' cam since the BW won't really let you use higher rpm's anyhow.
--
'63 PV544 rat rod, '93 Classic #1141 245 (now w/16V turbo)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B20A block with B20F head [140-160]
posted by  WWUE30  on Wed Apr 28 18:01 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.