Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Adding another wire through the gear shift shaft 200 1985

posted by  Shaughnessy on  Thu Jul 15 03:49 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 23:53 CST 2014
[RELATED]

Thanks, I do have an m46.

After doing some more mental thinking, I came to the conclusion you suggested. Not sure I want to go to that much effort for this. The wires for my OD are fine, and this is just a little "what the hell" thing.

I want to light up my gear-shift knob. I have extra caps (that I've collected over the years for another gear-shift related project I hope to do soon). So I took out the #'s on the cap (which is fun) and filled them in with a translucent epoxy. Sanded it smooth (12000 grit paper), and put in a small light behind it.

Originally I was thinking of using an LED (or two), but found some small lights with a foot long lead for cheaper. so I used those. It would be hooked up to the dash lights, so when I turn on the headlights the cap lights up. I think it'd be neat to see a lit up gear-shift knob. Although for all I know I'll find it annoying to have a stick shift with a lit up top.

It's not perfect yet, but for the prototype it turned out nice.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adding another wire through the gear shift shaft [200][1985]
posted by  Shaughnessy  on Wed Jul 14 13:54 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.