Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Ignition Switch Replacement- How Difficult? 200 1993

posted by  David Samuels on  Sun Jul 18 04:39 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 12:23 CST 2014
[RELATED]

The blind-groping difficulty of this task always leaves me wondering why, in this of all places, Volvo decided to use plain, slotted fasteners. Phillips, Allen, even Torx would be better. Anything to help keep the tool IN the head of the fastener. I'm with Dan. From the top or from underneath, it just takes a lot of patience. I find that an Enderle small screwdriver works well for this. The head of the slotted bit is thicker than your average "small" screwdriver and this helps keep the tool in the slot a little better.

DS






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Ignition Switch Replacement- How Difficult? [200][1993]
posted by  240GUYNY  on Sat Jul 17 08:42 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.