Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Check Engine Light-Coolant Temp Sensor-AGAIN!!!!!!!!!! 200 1993

posted by  newmex999 on  Sat Oct 2 11:32 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 21 09:05 CST 2014
[RELATED]

"I would also check the resistance between pin 5 of the ecu and the body of the sensor. There should be no resistance."

Let me make sure I understand this?

Pin 5 on the ECU is ground--correct?

So if I connect an ohm meter between the body of the sensor and pin 5 on the ECU then I should show a near zero reading on the meter, meaning the sensor is properly grounded---correct?

--
1993 240, 1992 240GL, 1985 240DL Wagon, 1983 240DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Check Engine Light [200][1993]
posted by  newmex999 subscriber  on Thu Aug 5 01:50 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.