Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine code 2-3-1 on a 240 200 1990

OK, so, i swapped out the 25AMP fuse with a new one and it started! Visually, the fuse i pulled out looks fine. Not sure why a new, different fuse made the difference, but that's just fine by me.

And it makes sense that I had the no start problem after monkeying with this fuse to turn off the CEL. and thus it could be the no start issue is separate from the CEL problem?

Thanks for your help. I can now get it to a mechanic who can hopefully help out with the CEL.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine code 2-3-1 on a 240 [200][1990]
posted by  mshonline  on Sun Oct 24 01:59 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.