Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

repack or replace the bearings 200 1990

posted by  transit wind on  Mon Nov 1 08:11 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 22:40 CST 2014
[RELATED]

You might have a sticking caliper that causes the pads to drag too much. If so pull the brake shoes and get a little red straw that comes with PB blaster and try loosening it up. Maybe try brake cleaner first. Push the piston in and slightly apply the brake to pop them out a little with shoe back in place. Do it a couple times and hope they loosen.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New repack or replace the bearings [200][1990]
posted by  chup  on Sun Oct 31 03:12 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.