Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Different heater blower problem 200 1991

posted by  Onkel Udo II on  Mon Sep 5 11:18 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

It is hard to say for sure if the blower is going bad but there is excessive resistance somewhere.

Position 4 bypasses the resistor so:

Either the wiring to the resistor is toast
The resistor is toast (likely)
The switch has inexplicably failed (very unlikely)
Someone has done a weird redneck engineering fix

All of this kind of requires tracing the wiring and testing the resistor. I think Art has a tutorial on how to test it from the switch. As you trace the wiring, clean all the connections.

Personally I can live with position 4 only but most would get it fixed.

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Different heater blower problem [200][1991]
posted by  Eric in NC  on Mon Sep 5 10:32 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.