Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Prepump is this a good solution? 200

posted by  Nel621 on  Sat Oct 15 20:29 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 12:48 CST 2014
[RELATED]

Putting the finishing touches on my 81 Bertone,took me 10 years to finish.I had a no start and found that the hose to the prepump was gone.I 'm having the gas tank cleaned and want to replace the prepump while I have everything out.I have a new prepump from FCP that I got a while ago.I noticed that it does not have the extra rim around the center of the pump.The old one has this rim which holds the pump in place in the sending unit.Will it be ok to add a stainless hose clamp to the center of the prepump to act as the rim?What affect will the gas have on the stainless clamp?Or should I get an AC Delco prepump,these seem to have the the support rim on the pump.Thanks,
Nelson






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Prepump is this a good solution? [200]
posted by  Nel621 subscriber  on Sat Oct 15 20:29 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.