|
Ya it wasn't bad, in sted of splicing the wires I removed wires out of the connector then reinsert in correct places with exception of the 2 gear lever switch.
For the wire from the 5th gear switch I cut it out of the M46 wiring harness that I all ready hand hooked up to the trans. So the only wires I spliced was the 2 for the gear lever switch.
The only one I didn't hook up yet is the 5 gear light I will do that later because I know when it's in 5th gear so the light doesn't matter at the moment.
Now I need to look for a 3.73 or better yet a 3.54 (hard to find) rear end. I am only 2,000 RPM's lower then I was with the automatic. The 3.91 rear is just to low and my gold is to at least get 31 MPG highway.That's why I did this change over. Again thanks for all your help. Charlie
|