Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2014 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lower a arm bolt 1800

posted by  Rhys on  Mon Sep 3 21:42 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Nov 20 10:22 CST 2012
[RELATED]

If it's machined as a specific bolt for Volvo suspension I'm sure it's fine. Such bolts may not have a grade rating on them. Certainly there is no need for a grade eight on suspension stuff. Keep in mind too that in using a grade eight bolt the nut, and lock washer must also be of the same grade, and the tightening torque is also substantially higher than that for a grade five for instance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Lower a arm bolt [1800]
posted by  someone claiming to be Erik  on Mon Sep 3 21:25 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.