Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control arm problems 200

posted by  unggthat on  Fri Feb 1 08:10 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 6 10:37 CST 2014
[RELATED]

For Jacking points, get a good piece of 2X4 6 or 8 inches long and put it on top of the jack. Then, jack one side at a time on the boxed frame rail, just in front and inboard of the regular jack point. If you don't use a 2x4, it may crush some and that is not so good. Then put the jack stands on the regular jacking point.

At least, this is how I always do it...and I've done it at least 20 times on 240s . . .

Nate





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Control arm problems [200]
posted by  Jades  on Tue Jan 29 17:30 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.