|
Hello Spook,
I pulled the wiring to the rear sensor and one lead was broken and just sitting on the other wire half making was tested to be a good connection.
It seems the ABS is more sensitive than the speedo. I have an old front sensor lead (extremely tough housing)I will solder connectors to this and waterproof the connections as best I can.
My bulb sensor is as always a PITA. Step on the brake and the sensor light says burnt bulb but both brake lights work. I'll swap the bulb sensor out and see how that works.
Dinner party so won't get to it till tomorrow but will let you know.
cheers
|