Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Checking the chip for damage 200 1992

uid 27's pic
posted by  Art Benstein on  Mon Aug 21 17:24 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

Dave, there's no questioning your soldering; looks great. A 260 on Rx1 is perfect for checking the transistors for shorts. Ground is the same foil you see joined to the large heat sink tabs on the chip. I should have said so.

I should note here, as there's always an exception. In every case where someone has brought me a damaged board, damaged by the coil signal, one of the step motor transistors was shorted. Close to zero ohms to ground. Not being shorted doesn't prove it wasn't damaged, but being shorted does prove it was.

Does the gear you have in there now look like carver's?


--
Art Benstein near Baltimore

Milt Famie was a pitcher for the Cubs. Unfortunately, he had a great fondness for beer. After walking several successive batters in the 9th inning, the manager of the opposing team turned to one of the batters asking what that was all about. Said the batter "It was the beer that made Milt Famie walk us."





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 92 240 Speedo good, odometer inoperative [200]
posted by  Dellaone  on Fri Aug 18 16:04 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.