Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Checking the chip for damage 200 1992

posted by  Dellaone on  Thu Aug 24 07:08 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 19:30 CST 2014
[RELATED]

Hi Art, I finally checked each motor post to ground and each side is well above 1000 ohms (like 1200). I uploaded new "exhibits" to the photo album and you will see a comparison of the 2 25 tooth gears that I have. You asked if my gear looked like the other black gear shown previously and the answer is yes. The new gear (white gear) from odometergears.com fits perfectly on the axle pin of the 15 tooth gear (also from odometergears.com). The black gear is a sloppy fit on the axle pin and the gear tooth profile is different; seems like the teeth are fatter along the sides and towards the root.

The car is up in the air right now as I am working on the front struts, and while I heal, I have to go slow. I will post as soon as I get a chance to let you know how it turns out.

Thanks for all of your help. The wiring diagram was especially good.

Dave Milo






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 92 240 Speedo good, odometer inoperative [200]
posted by  Dellaone  on Fri Aug 18 16:04 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.