Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2005 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Gen 1 / Gen 2 1800 Tachometers 1800

posted by  PBL1 on  Mon May 24 08:29 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Ron just to make sure I have the Rev counter pickup wired correctly. Would you happen to know the three markings on pickup terminals labeled "B'. "+". "M" should connect to Black/white wire to distributor to "B", White wire from fuse panel 12v to "+" and Black/brown wire to tach to the "M" terminal if that is correct? Also when I test the White wire from fuse panel from ignition switch I get 12v with key on position 1, 12v on position 3 (run) but zero volts on position 4 (start).

Thank you,
Peter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine/Transmission installation [1800]
posted by  PBL1  on Sat Feb 20 16:47 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.