Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2016

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M46 bearing compatibility?

posted by  planetman on  Sun May 15 17:22 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

I have to admit, I'm not the transmission rebuilder at our shop although I've assisted enough times to know what has to be done.

That being said, I will tell you that we learned how to rebuild M40/M41 transmissions by using the Haynes manual and we didn't have any of the Volvo special tools back then.

However that was many years ago and we now have most of the special Volvo tools needed to rebuild M4, M30/M40, M31/M41, M400/M410 and M45/M46/M47 transmissions and some tools we custom made.

I reviewed the M46 procedure in the Haynes manual and it looks like it can be rebuilt without all of the Volvo special tools.

--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M46 bearing compatibility?
posted by  mike66  on Wed May 11 14:30 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.