Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Refinishing alloy wheels . . . calling all metalurgists!

posted by  someone claiming to be Nathaniel on  Tue Jul 24 02:27 CST 2001 [RELATED]

What is the best way to prepare alloy wheels for painting? In the past I've used airplane stripper to get all the clear coat off and most of the old paint but, man-oh-man, what a nasty project that was! Have a sand blaster but have never used it for stripping alloy wheels; never gave it any thought until now.

But is the alloy too soft resulting in the wheels being pitted by the sand? Will a finer sand produce good results? Have got the 5 spoke turbo wheels which appear to be hard enough to sustain being blasted but not too sure and am hesitant until hearing from the metalurgists amongst us.

Regards,





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Refinishing alloy wheels . . . calling all metalurgists!
posted by  someone claiming to be Nathaniel  on Tue Jul 24 02:27 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.