|
The starting sequence is:
Turn key to start
Power goes to ECU
ECU sends power to Hall Effect Sensor in distributor
Engine turns over
Pulses are sent from distributor to ECU
ECU grounds fuel pump relay
Relay sends power to fuel pump
ECU sends timing spark info to power amplifier
Power amplifer sends pulse to coil primary
Coil sends HV power to distributor
Distributor sends HV to correct spark plug
When the car does not start do you have spark? If so the Hall Effect
sensor is ok.
If not check the output of the distributor and see if the output changes
from 2 to 10 volts as you turn the engine over by hand (power on but
the coil disconnected.
Don
|