Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: testing temp sensor at ECU 200 1991

posted by  someone claiming to be John Sargent on  Tue Aug 14 12:15 CST 2001 [RELATED]

If you have LH 2.4 Jetronic, you will test from terminal 13 of the ECU connector and ground. 80 degrees C, 290-364 ohms; 20 degrees C, 2,280-2,720 ohms; -10 degrees C, 8,260-10,560 ohms. I don't have a Regina fuel system manual, but my aftermarket manual shows the same terminal for Regina connections to the CTS. The manual shows the same resistance figures.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New testing temp sensor at ECU [200][1991]
posted by  someone claiming to be David A. Knight  on Tue Aug 14 02:58 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.