Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: location of coolant temp sensor 200 1990

posted by  someone claiming to be Mike W. on  Fri Sep 14 08:50 CST 2001 [RELATED]

Zakir:

Driver's side (in the US) of the cylinder head, just about below the #3 cylinder runner of the intake manifold. Takes a 19mm socket. Drain a gallon or so of coolant from the engine before you remove it or you'll have coolant all over the place. You can test it in a pan of water with a multimeter. Haynes and/or Bentley would have the specs, but suffice to say that resistance should decrease as temperature increases.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New location of coolant temp sensor [200][1990]
posted by  someone claiming to be zakir  on Fri Sep 14 08:17 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.