Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Throttle Position Sensor Wiring 700 1989

posted by  Vroom on  Tue Jan 29 10:34 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Open the throttle part way and see which wire has 12 v

You're going to like this diagram
Go to www.autoelectric.ru/auto/volvo/740/1989/740-89

Maybe you want to do what did, I junked the turbo+ and installed a dawes valve and a solenoid valve. Now if I want power I hit the switch on the dash and my boost level jumps from stock 7-8 psi to 14 psi (I adjusted the g-valve for 14). No more depending on the turbo+ for extra boost, it comes on when I say so.

Steve
--
88 765 w/2stage boost & G-valve @ 14 psi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle Position Sensor Wiring [700][1989]
posted by  someone claiming to be pal@speed-racer.com  on Mon Jan 28 11:52 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.