Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2012 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Anything tricky about changing shocks? 120-130 1966

posted by  justin on  Mon Mar 18 04:32 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 8 10:09 CST 2009
[RELATED]

Don't know if you've done this already, but if not...

You need a ball joint popper and a propane torch to get the spindle separated. Be VERY careful with the springs. First take the upper and lower shock absorber mounts off. Put a jack under the lower A-arm and then, once the ball joint has let go, lower the jack until the spring is fully extended. Then take it and the shock out. When reattaching the lower ball joint to the spindle, use the weight of the car to keep it still while turning the big nut. Use new split pins.

George Downs sells a great ball joint popper. You can find him on this list or in Bartlesville, OK if you're around there. I've used one of his at least a dozen times and am always happy with it.
--
Justin 70 1800E, 66 122E






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Anything tricky about changing shocks? [120-130][1966]
posted by  ereuter  on Sat Mar 16 09:42 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.