Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What is Error Code for Knock/Ping? 700

http://www.geocities.com/MotorCity/Garage/6776/apc.html

Knock 'Light':

If a LED is connected to power and the ground leg of the LED is connected to terminal 19, the LED will light for 0.5 seconds when knock is detected. I mounted my LED in the little blank plate above the headlight switch. I used a 12VDC LED from a local electronic parts store.

its for a B21 so ...hm well its a start i guess a map of the ECU would easily tell you where to hook it up ... oh and i'm still looking for that LED stuff there HAS to be sometihng about it online

more
http://www.ecanfix.com/~mdhamilton/fuelmod.html
its DSM but hey still same idea i guess ..and well i'm still looking

http://hjem.get2net.dk/bengaard/apc-syst.htm
The wiring is to be done according to the drawing below, if you want an indication on when the knock is detected, connect a 12V LED to pin 19.

The LED is connected to 12V plus from somewhere in the dashboard. Ground is connected to pin 19.


and only after like 5 mins of searching ... haha while doing 30 other things .. i love the net






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What is Error Code for Knock/Ping? [700]
posted by  thelostartof  on Mon Mar 18 05:47 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.