Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

strut replacement 200 1988

posted by  wongg3 on  Wed Jun 12 08:28 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 20:12 CST 2014
[RELATED]

That doesn't sound so bad. Keep in mind that the upper strut mounts are quite expensive. At FCP Groton, they are $40 each, but they are Scan-Tech, which I have found to be poor. The part from Volvo is about $120 each, retail. Make sure you use the Volvo part, or the Boge branded part. The KYB units will fall apart, and the Scan Tech units will also fall apart, and have poor fit to begin with.

Find out what brand they are using for the upper mount, and also what strut they are using.

If you do the job yourself, you can rent the spring compressors, or buy for about $70.

Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New strut replacement [200][1988]
posted by  Joe HC  on Wed Jun 12 07:51 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.