Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 No acceleration/ Fault Code 200 1992

posted by  wongg3 on  Mon Jul 29 05:47 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 20:12 CST 2014
[RELATED]

I think the ignition unit is on the firewall, kind of under the glove compartment. The FI computer should be the one on the side, yep.

Check out the procedures at 241-6 in the Bentley book. The socket 6 will give you the codes for the ignition, socket 2 will give you the codes for the FI.

If the ignition computer is not getting a load signal, and the wiring is ok, then maybe your AMM is fried. It would give similar symptoms to what you describe, I believe. Try this: with the key removed from the ignition, unplug the connector to the AMM. Now see how the car runs. Is there any change? With the AMM unplugged, the car should operate in the "limp-home" mode. Maybe it already is.

Good luck, let us know what happens!
Greg






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 No acceleration/ Fault Code [200][1992]
posted by  swede740  on Sun Jul 28 18:11 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.