Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

pcv

posted by  the kick inside on  Tue Sep 17 09:12 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 17 09:58 CST 2007
[RELATED]

Hi Jim, I have a 91 turbo..and this kinda confused me as well!

No you dont havea flame trap, but yes you do (sort of)

You have all the tubes/breather boxes etc refered to in the FAQ...but you dont have the actual 'flame trap' filter screen in the tube above the breather box.

I just did mine (first time) and rreplaced the breather box as well (cleaned all the tubes out and replace o ring under breather box and on oil filler) its easy just follow the FAQ and allow at least a couple of hours!

u will NEED at least 18" extensions on your socket AND a knuckle!

I would also suggest a gallon of de-geaser for washing it all thru and for doing the engine bay.

PS getting the s tube back on the breather box is a SOB - so dont attempt the job unless you are calm (its just fidly!)





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New pcv
posted by  someone claiming to be jim  on Tue Sep 17 08:49 CST 2002 >
  • New pcv
    posted by  the kick inside  on Tue Sep 17 09:12 CST 2002 >
    • New pcv
      posted by  someone claiming to be 940t  on Tue Sep 17 09:21 CST 2002 >
      • New pcv
        posted by  the kick inside  on Wed Sep 18 11:44 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.