Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1990 740T driver's power window braaap

posted by  dick on  Sat Oct 12 11:52 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 3 15:24 CST 2014
[RELATED]

Believe there is a part in the FAQ on this. Anyway, I have fixed my 93 with just a half inch piece of wood glued to the bottom of the door, the inner portion. This acts as a stop for the window mechanism when the mechanism bumps on it. What has happened is the stop built into the mechanism is flimsy and is bent or broken off, so make your own. I used contact cement or J-B Weld to hold the part in place.

Take off the inner door panel and lower your window to locate where you want to glue the stick or wood. Try it to make sure it works where you have it placed. Cost: zip

Good luck,

dick






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1990 740T driver's power window braaap
posted by  someone claiming to be JohnB  on Fri Oct 11 16:36 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.