Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

bolting on a turbo??

posted by  Jessie on  Mon Dec 2 14:24 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jan 18 17:45 CST 2011
[RELATED]

Check out turbobricks.com there are guys there that have done this You can convert B23s to B23FTs... some say the best block for turbos. But its not easy. You need to drill holes in the block for the turbo oil pipes, and you need B23 turbo pistons (about 400 bucks american I have heard). Of course this means you have to rebuild the engine. The you need a fuel system and ignition that can deal with boost. So you would need custom stuff or the fuel system from a Volvo turbo (kjet 240 or LH 700) and a head to match the fuel system. So ya you can do it, but you have to be a turbo nut!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New bolting on a turbo?? [200][1986]
posted by  Gandolf the Grey  on Sun Dec 1 13:10 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.