|
well the wiring on this car is all messed up first there was no fuse holder the two wires where just electrical taped together. so i'm going to solder in a fuse holder and put in a 25amp fuse. No i jumpered the fuel pump relay when these two wires were connected and the pumps ran but the car still wouldn't start i only tried starting it two times. so is the relay bad then cuase if the ingnition switch is in the run position the pump dosn't run but i jumpered 30 and 87/2 and the pump ran. So i guese i sort out the wiring then see if the relay will work or not.
|